**Set Global Settings**

Choose Units, Keg Mode and Scale Sensitivity.

**1. Install Keg in Kegerator & Tare**Make sure Plaato Keg is placed on a stable flat surface, standing freely without any weight on top. Then press «Tare» to zero the device.

Note. Plaato Keg works as a scale, and must be tared without load on top to get accurate measurements.

**2. Insert «Empty keg weight».**The weight of the empty keg will be subtracted from the measurement, in order to only weigh the actual contents.

Corny kegs weighs about

10,4lb (4.45kg)

You can use the Plaato Keg to measure the weight of your keg.

** **

**3. Set Max Keg Volume**

This variable is used to calculate the percentage of remaining beer in the keg.

**4. Set the Final Gravity**

Finally, you can set the Original Gravity and Final Gravity of your beer to calculate the ABV. Final Gravity is also used to calculate the weight and volume of your beer. OBS! If you do not know the Final Gravity of your beer leave it as 1000 and you will still get a good estimation of what is left in your keg.